Calgary winters require dependable heating, and furnaces are central to home comfort. Furnace error codes alert homeowners to potential problems early, helping prevent damage, enhance safety, and allow HVAC technicians to diagnose and repair issues quickly.
Need a New Furnace?
With Flexible Financing Options
Common Furnace Error Codes for Carrier, Lennox, and Goodman
Each furnace brand displays error codes differently. Knowing the most common codes and their meanings can save time and money, especially in Calgary’s cold climate where heating interruptions can be costly.
Carrier Furnace Error Codes
Carrier furnaces use flashing LED lights to indicate operational issues. Common codes include:
- 01 – Pressure Switch Error: Indicates a blocked vent, faulty pressure switch, or airflow issue. Repairs in Calgary generally cost CAD $200–$700.
- 03 – Limit Switch Tripped: The furnace has overheated; could be due to restricted airflow or a dirty filter. Typical repair costs in Calgary: CAD $200–$700.
- 08 – Ignition Failure: Furnace failed to ignite; may require cleaning or replacing the ignitor or flame sensor. Local repairs cost CAD $200–$700.
Lennox Furnace Error Codes
Lennox furnaces use LED indicators and control board codes. Common errors include:
- E0 – Flame Rollout: Flame detected outside the burner area, potentially caused by blocked venting or dirty burners. Calgary repairs usually range CAD $250–$900.
- E1 – Ignition Failure: Furnace did not ignite properly; may involve the ignitor or control board. Repair costs in Calgary: CAD $250–$900.
- E6 – Pressure Switch Issue: Indicates venting or airflow problems affecting pressure. Typical Calgary repair costs: CAD $250–$900.
Goodman Furnace Error Codes
Goodman furnaces display error codes via flashing LEDs or control board indicators. Frequent codes include:
- 1 Blink – Pressure Switch Fault: Signals airflow restrictions or blocked vent. Repairs in Calgary generally cost CAD $200–$800.
- 2 Blinks – Flame Sensor Error: Flame sensor needs cleaning or replacement. Local repair costs range CAD $200–$800.
- 5 Blinks – Inducer Motor Fault: The inducer motor is malfunctioning or blocked; may require repair or replacement. Calgary costs: CAD $200–$800.
How to Respond to Furnace Error Codes in Calgary
Immediate action can reduce downtime and repair costs while keeping your home safe.
1. Resetting the Furnace
Many minor errors can be cleared by safely resetting the furnace. Only reset when it is safe to do so, and avoid repeated attempts if the code persists.
2. Basic Troubleshooting
Homeowners can check power supply, thermostat settings, filters, and venting before calling a technician. Simple fixes often prevent unnecessary service calls.
3. When to Call a Calgary HVAC Technician
If error codes continue after a reset or if the furnace shows safety lockouts, it’s time to call a certified technician. Calgary service calls typically cost CAD $150–$250 for diagnostics and CAD $200–$900 for repairs. Homeowners can review our Furnace Repair Calgary services for professional support.
Cost Considerations for Furnace Repairs and Error Code Resolution
Repair costs vary based on the brand, parts, and labor. Understanding typical costs helps Calgary homeowners plan maintenance or replacement.
Brand | Typical Repair Cost (CAD) |
Carrier | $200–$700 |
Lennox | $250–$900 |
Goodman | $200–$800 |
Repeated error codes may indicate that replacement is more cost-effective. For guidance, see our Repair or Replace My Furnace guide.
Preventing Furnace Error Codes in Calgary
Proactive maintenance is key to reducing furnace errors and maintaining efficiency. Annual tune-ups through Furnace Tune-Up & Maintenance Calgary help keep components in top condition. Regular filter changes, airflow checks, and inspection of venting and gas lines also prevent common error codes.
Frequently Asked Questions
What do the flashing lights on my furnace mean?
They indicate error codes that help identify operational issues or safety lockouts. Specific patterns vary by Carrier, Lennox, or Goodman models.
Can I fix furnace error codes myself?
Minor resets and filter changes are safe; anything involving gas lines or control boards requires a certified Calgary HVAC technician.
How much does it cost to repair furnace error codes in Calgary?
Typical repair costs range from CAD $200–$900 depending on the brand, issue severity, and parts required.
Do error codes shorten my furnace lifespan?
Not directly, but ignoring repeated codes can lead to further damage and reduce the efficiency and life of your system.
Fast, reliable furnace repair in Calgary. We diagnose and fix all makes and models to restore your home’s warmth quickly and safely.
Keep your system running smoothly with a professional furnace tune-up in Calgary. We clean, inspect, and optimize for peak efficiency and safety.
Breathe easier with professional furnace duct cleaning in Calgary. Remove dust, debris, and allergens for cleaner air and better system performance.
